Specification and size
Construction and packaging
The roll type consists of three layers, including the top liner and base film. This is rolled onto a paper core at a given roll length. A sheet type is also available. Please contact us for more details.
n Configuration
| Roll type |
Sheet type |
 |
 |
n Packaging
| Roll type |
Sheet type |
 |
 |
Specific applications
- Biomedical electrode materials
- Biomedical adhesives
- Wound dressings
- Industrial adhesives
- Cold-feel sheets
- Industrial sensors
Product numbers and features of gel sheet materials
These range from adhesives with high strength to adhesives with almost none, and have a variety of impedances.
| Grade |
Code
name |
Main
application |
Standard
gel thickness |
Standard
roll length |
Special
features |
| SR |
SR-H |
Low frequency stimulation |
0.8mm |
100m |
High adhesion |
| SR-R |
0.75mm |
100m |
Retained adhesion even after repeated application |
| NR |
NR |
Grounding plate |
0.5mm |
100m |
Anti-Al corrosion property |
| CR |
CR-S |
ECG |
0.6mm |
100m |
Low impedance, soft adhesion |
| CR-H |
0.6mm |
100m |
Low impedance, less hang-out of gel |
| HIT |
HIT |
R-ECG |
0.65mm |
100m |
High initial tackiness |
| AG |
AG-01 |
Biomedical adhesive tape |
0.1mm |
150m |
High adhesion suitable for long-hour application |
| G |
G-CR |
Others |
0.3,0.5,1.0mm |
100m,150m |
Low impedance, slight adhesion, elasticity |
| G-SC |
0.3,0.5,1.0mm |
100m,150m |
Slight adhesion, elasticity |
Standard roll width : 300mm
Liner : 60µPE for top liner, 100 or 125 µPET or 100µPE-coated paper for base liner
Paper core dia. : 3 or 6 inches
Re-inforcing material
The Re-inforcing material is a fabric to back up the gel for easy handling and processing.
| 
|
Available as sheet |
 |
Available as roll |
* For other combination, please contact us.
Applied products
*”Adhesion strength” in the above graph shows the values measured in accordance with JIS-Z0237, 90 degree peel-off method using Bakelite plate
|
